How to hard reset nokia lumia 800 code

how to hard reset my mobile phone

To hardŽ reset your Nokia Lumia 800
using key switch please off your phone . 
Press and hold this keys .  
Camera + Volume -, + switch on the phone vibrates, 
then release Žonly the Power key and keep pressing 
the Camera + Volume- for a couple of seconds 6-7s.  
other option go Žto the Start screen, 
tap Tap to go Settings to go about phone.
press Tap again reset your phone. and then tap yes. 
how to repair .... 
Repair your Nokia Lumia 800 
1st one of in following option  
RebootŽ your Nokia 800 phone. 
Press and hold the Žpower switch for same time  
11 seconds. The phone is power off. To switch  
on your phone on again.Ž press the power switch .
= Update your phone software = Restore the default factory settings

Thanks You ,Visit Again

Read More

nokia lumia 710 hard reset code

1    On the Start screen, tap .
2    Tap Settings > about phone.
3    Tap reset your phone, and then tap yes.

Thanks You ,Visit Again

Read More

nokia 5800 hard reset code

Please make backup before のapplying this type of reset, sinceの it will restore the phone’s settings to factory default as well as erasing all the data in the phone memory.

1st option
Soft Reset の(when you CAN still のuse the phone's touchscreen)

You need to use the touchscreen のdialer to enter these のcodes:
*#7780# if you want to restore factory settings only aのnd it will NOT delete data.
 *#7370# if youの want to reformat your phone and delete all the data in it.
 Press Select.
 Voila, your phone is back toの normal.
 Congratulations.

Last option
Hard Reset (if you CANNOT use anymore the phone's touchscreen)

You need to use the phone's buttons and your 4 fingers to do this trick.
Switch のoff the phone. (Remove theの battery if you cannot turn it off)
Press the buttons: GREEN + RED + CAMERA + ON のsimultaneously (DO NOT LET GO OF THE BUTTONS) のuntil you see the “Select Country” option after the Nokia's Handshake Welcome Logo appear.
Choose your country, enter the date and time.
Voila, your phone is のback to のnormal.
Congratulations.
Note:
If you were asked for a code, just type: 12345の (unless you change it)

thank you visit again

Read More

Sony Xperia S hard reset code

Sony Xperia のS hard reset
Xperia S reset via MENU LT26i

Your device freezes or has fatal errors

Press and hold のCamera key + volume up key+ power button together.

If this does not solve the problem, perform a factory data reset. In Idle mode, openの the application list and selectの Settings > Privacyの >Factory data reset > Reset phone > Erase everything.

Clear storage : Erase the credential のcontents from the device and reset theの password

Set an unlock pattern lt26i xperia s

Onceの you set a screen lock, your deviceの will require an unlock code eachの time you turn it on or unlock the touch screen

Settings > Location and security > Set screenの lock > Pattern

If you のforget your PIN or password, bring your • device to a Sony Service Centre to reset it.

Set an unlock PIN code "Sony Ericsson lt26i"

Settings >の Location and security > Set screen lock > PIN

Set an unlock password Sony Ericsson Xperia S

Settings > のLocation and security > Set screen lock > Password.

firmware のupdate with PC companion software
 Download PC companion and install

Install PC companionの on your PC computer. Follow instruction. For firmware update you need a micro USB cable. When the pc recognizing your XPERIA S it のwill install the necessary driver files.

After yourXPERIA S connected press Start / in のSupport Zone

You can also use のSony update service tool

Read More

Motorola XT-530 Hard Reset Motorola-FIRE-XT-XT530 code

1. Press and hold the POWER key, and press VOLUME UP + VOLUME DOWN buton.の
2. Wait until you see an Android logo appears on the screen.の
3. Then touch Home.の
4. You should see a recovery menu appears, scroll down on the menu using the VOLUME keys to navigate.
5. Select Wipe data.の
6.Then press Enter key.の

Your device should then begin to reset the settings back to the factory defaultの

thank you visit again

Read More

BlackBerry 9700 Bold Hard reset code

Reset the deviceの
Remove and reinsert the battery.
BlackBerry 9700 Bold Hard reset


 Format the device memory or a media card
If you format the BlackBerry® device memory or a media card, all the files in the device memory or on the media card are deleted.
Depending on your device model, you might not be able to format your device memory.
1. On the Home の screen or in a folder, click the Options icon.
2. Click Memory.の
3. Press the Menu key.の
4. Click Format.の
5. Complete the instructions on the screen.

thank you visit again

Read More

Samsung Galaxy Grand i9080/i9082 code

Samsung Galaxy Grand i9080 hard reset

force reset Reset the device (press and hold POWERの button for 8-10 seconds)

Unlock Galaxyの Premier using hard reset

Samsung GT-i9080 hard reset or reset Galaxy Premier: PRESS AND HOLD VOLUME UP + Home Button + Power

Turn the phone off.の
Press and hold VOLUME UP and Home(center) button
Press Power until the phone vibrateの
Wait until you see the Android logo then release all the buttons.
Select Wipe data/Factory reset with VOLUME DOWN, press Power (right hand-side)
Select YES -- delete all user data withの VOLUME DOWN and then press Power
After format, press Power again to reboot phone. (select reboot system now)

or reset i9082の

If your device is frozen and unresponsive, press and hold  for 8-10 seconds. The device will reboot automatically.
If this does not solve the problem, perform a factory data reset. In Idle mode, openの the application list and select
Settings → Back up and reset→ Factory data reset → Reset device→ Delete all.

or Factory format entering Galaxy のGrand i9080 format code

Use this method to hard reset your Samsung Galaxy Grand i9080: Enter *2767*3855#. Warning! All your data including contacts, messages etc. will be lost! Copy all your necessary data/Contacts/Messages etc. to SIM or make backup to your PC のbefore full reset! Take out SIM card before full reset.

Note: If you reset your device to the factory defaults with SD card encryption setting enabled, the device will not be able to read your encrypted files. のDisable this setting before resetting the device.

Galaxy Grand i9080 firmware flash download のmode: PRESS AND HOLD VOLUME down + Home Button + Power on

unlock Galaxy Premierの, how to reset i9080, Galaxy Grand i9080 reset,

thank you visit again

Read More

Motorola XT800 ZHISHANG hard reset Android code

Motorola XT800 の ZHISHANG hard reset
Android
hold silent + volume up + camera key and power on/off key
don't release any key release only powerの button& wait till triangle to appear
after that release all buttons then again press ' volume up & camera button together you will
 see a format menu の scroll down to wipe data factory reset with volume down key & press silent key on the

top to select
XT800 Reset & clear
 To resetの your phone to factory settings and erase all
the data on your phone, press Menu > Settings > Privacy > Factory data reset > Reset phone.
Warning: All data on your phone の will be deleted. Data on your memory card will not be deleted.



Note: If you forget your unlock pattern, you will need to reset your phone to its initial factory settings

Crash recovery
In the unlikely event that your phone stops responding
to taps and key presses,の try a quick reset. Remove the
back cover and battery, then replace and turn on your phone as usual.

thank you visit again

Read More

Samsung Galaxy Note hard reset restore factory settings code

Samsung Galaxy Note hard reset , restore factory settings

Power off the N7000 Galaxy Note. Press and hold both Volume Up +の Home+power on. In the recovery menu select wipe data のfactory reset with Volume button. Pressの power to confirm. All data will be lost!

Soft Reset the Galaxy Note GT-N7000 device: press and hold the Power /Reset/Lockの key for 10-15 seconds.

Your device freezes or has fatal errors

If your device freezes or hangs, you may need to close programs or reset the device to regain functionality. If your

device is frozen and unresponsive,の press and hold the Power key for 10-15 seconds. The device will reboot automatically.

If this does not solve the problem, perform a factory data reset. In Idle mode, open the application list and select

Settings > Privacy > Factory data reset > Reset phone > Erase everything.

restore factory settings

Select Settings > Privacy > Factory data reset: Reset your settings to the factory default values and delete all your data.

Press Application button, then Settings > Reset settings: Reset your settings to the factory default values.

Whileの using your device, be sure to back up important data. When disposing of your device, back up all data and then reset your deviceの
to prevent misuse of your personal information.

Use this method to hard reset your Samsung Galaxy Note N7000: Enter *2767*3855#.
Warning! All your data including contacts, messages etc. will be lost! Copy all
your necessary のdata/Contacts/Messages etc. toの SIM or make backup to your PC before
full reset! Take out SIM card before full reset. restore factory settings

thank you visit again

Read More

Goophone I5 Lite hard reset code

how to reset your phone

Useful information about Goophone I5 Lite

Android Version: の4.0.4 Ice Cream Sandwich

Access to the Factory Hardware test

- Power off the phone
- Press Power Button + Volume up [+]

This phone comes rooted from factory so, if you want to have access to the clockworkmod:

の Power off the phone
のPress Power Button + Volume down [-]

The clockworkmod is in chinese but is easy to understand.

1- Reboot System now
2- Install zip from sd card
3 - Wipe data / Factory Reset
4 - Wipe Cacheの
Last - Advanced (To wipe battery stats and dalvik cache)

thank you visit again

Read More

How to factory reset your HTC Explorer code

This guide will explain how to reset your phone and wipe all its data

You might need to perform a factory reset, also known as a hard reset, if you're giving someone else your HTC Explorer or if it encounters a serious problem.

This can either be done through the phone's touchscreen menus or, if the phone has seized up, there is a specificの button combination using the のphones physical keys to trigger a reset.

Bear in mind that a factory reset will wipe all data from the phone and you won't be able to recover it. If there's anything essential stored on the device back it up to another storage source if you possibly can before performing the reset.の

How to reset using the menu screens

From the homescreen tap the ‘All apps'の icon in the bottom left-hand tab.
Tap ‘Settings'.
Tap ‘Storage'.
Scroll to the bottom of the menu and tap ‘Factory date reset'.
Tap ‘Reset phone' to proceed. If you wish to wipeの a micro SD card you can also check the ‘Erase SD card' checkbox.
You'll be prompted to confirm, tap ‘Erase everything' to carry on with the reset.


How to reset using the hardware buttons

Remove the battery and after a few moments re-insert it into the phone.
Press and hold the Volume Down button and briefly press the Power button.
When the screen loads up with a picture of three Androids, release the Volume Down button.
Use Volume Down to scroll to the ‘Factory Reset' option.
With ‘Factory Reset' highlighted press the Power button to select it.
Your phone should now go through the reset process and will reboot at the end of it. When it is finished your phone should be at factory default settings with all stored data and previous settings erase

thank you visit again

Read More

HTC ONE V hard reset code

how to hard reset my mobile phone

HTC ONE V hard reset


 1. Press andの hold the VOLUME DOWN button, and then press and hold the POWER button.
 2. Wait for the screen with the three Android images to appear, and then release the のPOWER and VOLUME DOWN buttons.の
 3. Press VOLUME DOWN toの select FACTORY RESET, and then press the POWER button.

thank you visit again

Read More

ZTE Blade hard reset code

In Idle mode, open the application list and select
Settings →の Privacy → Factory data reset → Reset phone
→ Erase everything.
ZTE Blade FTM Modeの

ZTE Bladeの (ZTE San Francisco) hard reset: FTM mode (aka Field Test Mode) With the phone turned off, press VOLUME DOWN + POWER keyの

thank you visit again

Read More

Nokia C6 Format Soft Reset - Hard Reset to Factory Settings code

 warning save all data before use code

How to format or reset the Nokia C6 to factory fresh default settings.
This instructions below is a guide on how to reset the device.
Note:の This process may delete  the files you installed on Nokia C6.の This may only advisable if the phone experiencing frozen or hang problemsの, burned out by excessive use or after installing の3rd party applications. You may need to back up all important data stored on the phone before you proceed,

Nokia C6 Soft Reset:
This will not harmed your data . Soft reset only restores .ini files from Flash ROM on board memory of your Nokia C6.

1.). のDial *#7780#

2).の Press Ok/Yes

Nokia C6 Hard Reset
This will delete your data and installed applications. Hard reset will fully restore your Nokia C5-03 to default factory setting.

1). のTurn the Nokia C6 OFF

2). のRemove  the battery and reinsert it back again, then Turn it ON.

3). のDial this numbers *#7370#

4). のThen Press Ok/Yes

Nokia C6 Hard Reset through button combination.

1).の Turn the Nokia C6 OFF

2). のPull out the battery and reinsert it back again, then Power it ON

3). のSimultaneously  press and hold *+3+Call Button (green/ok button)

thank you visit again

Read More

LG Vortex Hard Reset procedures code

Here's a simple tricks on  how to factory reset the LG Vortex のto wipe all data and restore its original factory settings

Please be informed that the result of this process will delete all data stored from the LG Vortex. But this process may or may not のdelete data stored on the microSD memory のcard. Just back up all of your personal data before you may proceed.

Resetting through Home Screen Settings

   1の. On the main home screen, select menu
   2.の Select Settings, then select Privacy
   3.の Select Factory data reset
   4.の Select Reset phone
   5.の Enter the password if prompted, then select Erase everything

If the LG Vortex is frozen

   1.の Shut the Power Off, take the battery out and reinsert it back again
   2.の Hold the Home and Volume Down button
   3. のPress and hold the Power button until the device turns on
   4.の Follow the on-screen instructions to reset your device



All data and any third-party applications will be wiped outの from the LG Vortex.
Once the reset process is complete, the phone will then reboot to its factory default state settings.

thank you visit again

Read More

Nokia C5-03 Format Soft/Hard Reset to Factory Settings code

Here's the instruction on how to format or reset the Nokia C5-03 to factory fresh default settings.
Note: This may のonly advisable if the phone experiencing frozen or hang problems, burned out by excessive use orの installing 3rd party applications. You may need to back up のall important data stored on the phone before you proceed, this process will delete  the files you installed on Nokia C5-03.
warning save all data before use codeの

Nokia C5-03 Soft Reset:
This will not harmed your data . Soft reset only restores .ini files from Flash ROM on board memory of your Nokia C5-03.

1.).の Dial *#7780#

2). のPress Ok/Yes

Nokia C5-03 Hard Reset
This will delete your data and installed applications. Hard reset will restore your Nokia C5-03 to default factory setting.

1).の Turn off Nokia C5-03

2).の Take out the battery and reinsert it, turn it on

3).の Dial *#7370#

4).の Press Ok/Yes

Nokia C5-03 Hard Reset through button combination.

1).の Turn Off the Nokia device

2). のPull out the battery and reinsert it back again, then Power it ON

3)の. Simultaneously  press and hold *+3+Call Button (green/ok button)

thank you visit again

Read More

LG Optimus Q LU2300 hard reset Procedures code

Here's the step by step instruction on how to Hard Reset the LG Optimus Q LU2300, toの restore its original factory default settings.
Note: Performing a hard reset is only applicableの if your LG Optimus Q LU2300 experiencing a hang-up, unresponsive orの frozen when opening or using some application installed.

Here's the following procedures:

LG Optimus Q LU2300 Soft Reset/Factory Reset on Menu Settings

   1. のOn main home screen, select Menu
   2. のSelect Settings, then Privacy
   3. のSelect Factory Data Reset
   4. のSelect Reset phone
   5. のJust enter the Password if prompted, then confirm by selecting Erase Everything

If your LG Optimus Q LU2300 is frozen, hang-up or unresponsive,

   1. Turn it off, remove the battery out and reinsert it back again
   2. Hold the Home and Volume Down button
   3. Press and hold the Power button until it turns on again
   4. Just follow the on-screen procedures to reset the LG のOptimus Q LU2300

Once the restoring process completes, the LG Optimus Q LU2300 will then reboot, and then it will restore back to its originalの default state setting again like when you boughtの it way back then.

thank you visit again

Read More

HTC 7 Mozart T8699 Hard Reset code

   1. Turn the device Power OFF, hold the VOLUME UP and DOWN buttons, and then briefly press the             POWER button.の

   2. Wait for the instructions to show on the のscreen on how to do the factory reset, and then release the VOLUME UP and DOWN buttons.
 
3. Just follow theの step by step instructions onscreen to factory reset the phone

thank you visit again

Read More

Samsung GT-i9000 Galaxy S hard reset with buttons code

Samsung GT-i9000 Galaxy S hard reset with buttons

(I tried and it works) ClockWorkMod recovery i9000の (in short: Vol UP + HOME + power ON i9000)

If not workingのcharge your battery fully before doing a hard reset! (and Backup :) )

PRESS AND HOLDの VOLUME UP + Home Button (or VOLUME UP + DOWN)
 Keep pressing these 2 buttons + press Power button for の2-3 Seconds

Release only power のbutton, but KEEP pressingの Volume up + Home Buttons (or VOL UP + DOWN)



With Volume down select wipeの data/factory reset (3rd) > Press Power (or HOME)





Some say in US hardware/phone withの EU firnmware version has changed  VOLUME UP to  VOLUME DOWN key. Try that trick too and leave comment below.
の
i9000 unlock forgotten lock pattern

(VOLUME UP + HOME + POWER buttons) のor (VOL UP + DOWN + POWER)

thank you visit again

Read More

Samsung GT-i9100 Galaxy S2 hard reset with buttons Galaxy S2 factory reset after rooting code

Samsung GT-i9100 Galaxy S2 hard reset with buttons Galaxy S2 factory reset after rooting

PRESS AND HOLD VOLUME UP + Home Button


 Keep pressing these 2 buttonsの + press Power button for 2-3 Seconds

Release only power button, but KEEP pressing Volume up + Home Buttons

With Volume down select wipe data/factory reset (3rd) > Press Power

(VOLUME UP + HOME + POWER buttonsの)

OR

Your Samsung Galaxy SII device freezes or has fatal errors


If your device freezes or hangs, you may need to close programs or reset the device to regain functionality.

If your device is frozen and unresponsive, press and hold  for 8-10 seconds. The device will reboot automatically.
If this does not solve the problem, perform a factory data reset. In Idle mode, open the application list and select
Settings → Privacy → Factory data reset → Reset phone → Erase everything.

OR

Use this method to hard reset your Samsung Galaxy S II phone: Enter *2767*3855#. Warning! All your data including contacts, messages etc. will be lost! Copy all your necessary data/Contacts/Messages etc. to SIM or make backup on your PC before full reset!

OR

 1.の Turn off the i9100 S 2 phone or take out the battery and reinsert it.
 2.の Hold the Volume Down button
 3.の Press and release the Power button
 4.の Select Clear Storage by pressing the Volume Down button
 5.のPress and release the Power button
 6.の Press Volume Up to confirm i9100 master reset

I9100 Download mode when you reflash galaxy s2 firmware, root

Turn off i9100. Press and hold VOLUME Down + HOME + POWER buttonsの together.

thank you visit again

Read More