Thursday, May 16, 2013
ATF box update v9.85 4shared
ATF v9.85
Hotfile Mirror
4shared Mirror
Mediafile Mirror
Release Date: May 15, 2013
Firmware Version Required : 10.3.50
*** Only Available via the AutoUpdate Server ***
Fixed Read Firmware Information for Manually Loaded Flash Files (NON VPL)
400% Speed Increase when Dumping eMMC Toshiba/New Hynix via TP
Fixed bug that does not automatically select USB connection on ATF Startup
Fixed bug on Scan Phone that makes some new Rapuv2 phones reboot and fails to read Simlock Data (Nokia 500, 311 etc)
################################################## #######################################
ATF v9.84
Release Date: May 09, 2013
Firmware Version Required : 10.3.50
*** Only Available via the AutoUpdate Server ***
Fixed Read Firmware Information via Flash Mode for some RAPU based phones (E5-00, C5-00, E6-00 etc...)
################################################## #######################################
ATF v9.83
Release Date: May 08, 2013
Firmware Version Required : 10.3.50
*** Only Available via the AutoUpdate Server ***
1.
Lumia WP8 Recovery Flashing Added
Supported Phones:
All Lumia WP8 Phones
This will allow re-flashing of Lumia Phones which encountered an error during a previous firmware update (incomplete flashing). This will only work if BOOT Loaders are still OK.
To perform recovery flashing:
1. Run ATF Software, load the flash WP8 Flash File and click FLASH.
2. Hold VOLUME_DOWN + POWER button until the phone will vibrate.
3. Release VOLUME_DOWN + POWER button then connect USB Cable.
4. Recovery Flashing will start and will Fix Partitions.
2.
BB5 Read Firmware Version via Flash Mode
Supported Phones:
All Single-CPU BB5 Phones (RAP3, RAPIDO, RAPUv1, RAPUv2, Broadcom and XG223)
NOT Supported Phones:
All Dual-CPU BB5 Phones (E90, N90, N95, N95-8GB, N73, N80 etc...)
This will allow you to know the current firmware version inside the phone just in case the phone is dead. It will also prevent you from accidentally DOWNGRADING any BB5 Phone. USB and FBUS Connection are both supported.
To check current firmware version:
1. Click "Buscheck" or "Backup RPL" Button
3.
Added Alternative USB Boot Method in Settings
In Settings --> Nokia Settings, check this:
Use BB5 USB Boot Settings Type 2 (Fixes Booting Problem on some PC)
If you get BB5 Booting Problems stuck at:
"FUR_Control_AddClient_BB5() ASIC_INDEX_CMT (Ready)"
* Complete Product Listing in Nokia.ini (as of May-08-2013)
################################################## #######################################
ATF v9.80
Release Date: April 30, 2013
Firmware Version Required : 10.3.50
Lumia Windows Phone 8.0 Dead Boot Repair via TP (First In The World!)
Supported Phones:
Lumia 520T RM-913
Lumia 520 RM-914
Lumia 520 RM-915
Lumia 521 RM-917
Lumia 620 RM-846
Lumia 720 RM-885
Lumia 720T RM-887
Supported Partition Repairs:
M.B.R. (Master Boot Record)
G.P.T. (GUID Partition Table)
SBL1
SBL2
SBL3
UEFI
RPM
TZ
WINSECAPP
Custom Read/Write eMMC Blocks also supported. The password is still
"password" in HEX format.
(Hint: RPL and Simlocks are inside a FAT12 Mountable Partition called DPP)
Added Test Point Pictures for 520T, 520, 521, 620, 720 and 720T
What's New ?
* Lumia Windows Phone 8.0 Dead Boot Repair via TP
* ATF FiRE Server Capable EXE (Flash Files/Links are still uploading)
Bug Fixes:
* Fixed Lumia Custom eMMC Read/Write Bug on new Hynix eMMC
* Fixed SD Card Custom Password Masking
Other Stuff
* Complete Product Listing in Nokia.ini (as of April-30-2013)
For this Update I give Special Thanks To:
X-shadow's Wife for editing the Test Point Pictures for the new Lumia Windows 8.0 Phones.
ATF Lumia WP8 TP v9.80 Update - Official Download Links:
Download Via Hotfile Mirror
Download Via 4shared Mirror
Download Via Mediafile Mirror
Download Via Mirrorcreator Mirror
MxBox v3.5 Revision 2.6 Latest Setup Download
MxBox v3.5 Revision 2.6 Latest Setup Download
MxBox v3.5 Revision 2.6 Latest Setup Download
MxBox v3.5 Revision 2.6 Latest Setup Download
MxBox v3.5 Revision 2.6 Setup
mxbox v3.5 rev 2.6 setup downoad
mxbox v3.5 rev 2.6 .rar
mxbox v3.5 rev 2.6 .exe
mxbox v3.5 rev 2.6 free download
MXBOX v3.5 revision 2.6
NOKIA module updated to version 2.6
- added: WP8 support
Refurbish Flashing support by USB
Recovery(Dead) Flashing support by USB
- added: Service Utility for WP8
Factory Reset without flashing
Read/Write Producttion Data(Product Code,PSN,HW version, etc ..)*
Read/Write WP8 NV items )*
Read/Write WP8 CERTIFICATE(NPC,CCC,HWC,RDC)*
Write CoverColor *
- added: SuperDongle Auth for WP8 phones
SuperDongle Auth is required to write important/secure data
- bugfixed: RAPUV2 security repair function
- revised internal fire module to enable download firmware package by product code
- added latest flash update v 12.46.000.1 to setup
- minor bugfix
* Write function require SuperDongle Auth
SL3 Logger updated to version 2.6
- minor bugfix and improvements
FIRE module updated to version 1.5
- minor bugfix and improvements
VolcanoBox 2.1.0 mediafire , hotfile
VolcanoBox 2.1.0
Whats new ?
Update SPD Android IMEI Write
(Now 95% SPD Android phone Supported for imei repair !!)
MTK Bug Fixed
MediaFire / Hotfile
Please share here all your tested preloader mode tested TestPinouts ....
Little Guide :
What is it ?
in MTK Android there is many Partitions in your phone. like Preloader, Recovery, Bootimg etc..... if somehow Preloader get Corrupted then you phone will not able to DETECT WITH PC !!! in other words you will have phone with BOOT DEAD.
How Preloader get corrupted ?
There could be few reasons but main reason could be that someone or you Flash your complete phone (include Preloader) with wrong files or with wrong ver. Also there could be reason someone Delete Preloader or you Deleted.
How could i know my phone have preloader dead ?
Preloader can be dead if some one Flash it wrong and after flash your mobile will not detect with pc any more. for confirm
open device manager
take battery out from phone
insert usb
insert battery
and check is computer detecting any device
If it's not detect then you have phone which Preloader is dead AKA Boot Dead
How can i repair it ?
you have to disassemble your phone and take pcb out. check there should be some Golden points. check these points there should be written on them Rx,Tx,GND,Vcc,Vcharge etc... check there should be written "COLO" or "KOLO" or "KCOLO" you have to Sold that point with GND After Sold Attach usb now your phone will detect with USB !! and now ready to Flash.
In some phones "COLO" or "KOLO" or "KCOLO" not written for those type of phones you have to test all points one by one Short Golden point with GND and attach usb cable which point short with gnd can able to detect your phone by pc is Force Preloader Mode Test Point !! Keep in mind Don't Short Vcc,Vcharge or any other pin which have 4.x Volts also i had tested "Colo" or "Kolo" or "KCOLO" don't have any kind of volts..
Download via mediafire
download via hotfile
