Thursday, September 10, 2015

How To Flash Intex Aqua Style 4.0 MTK Smartphone With SP Flash Tool

How To Flash Intex Aqua Style 4.0 MTK Smartphone With SP Flash Tool



Unofficial support site for this Phone By Welcome Zone Haldwani

The Instructions Given Below To Flash Stock Rom Or Any Custom Rom Flash File Firmware using Smart Phone Flash Tool (SP Flash Tool) on Your Android MTK SmartPhone .

Requirements:
1=> Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.
2=> SP Flash Tool And Usb Drivers .
        You Can Download It From Last In The Post
3=> USB Cable.

Step 1Download and install Android USB Drivers on your computer From The Link Given Up. In case You Already Installed Android USB Drivers on your Computer then skip this step.


Step 2:  Then Next Step Is Power Off your Android Smartphone and remove the Battery (if it is removable).

Step 3Download And Extract the Stock Rom or Custom Rom that you want to Flash on your Smartphone .

Step 4Download and Extract Smart Phone Flash Tool on Your Computer. After Extracting you will be able to see the following files.

Step 5Now Open Flash_tool.exe .


Step 6When Smart Phone Flash Tool is launched , Click on the Scatter-Loading Button That Is On Right Side .



Step 7Now , Locate the Scatter File (Give The Path Of That File You Extracted In Your Computer).

Step 8Then Next Is Click on the Download Button to begin the Flashing Process.

After Clicking On The Download Button You Can See This Type Of Screen .

Step 9: Now, Connect your Android Smartphone to the Computer Via USB Cable (without battery- if it is removable).


Now One Red Line Is Run ThenThen One Voilet Line Then One Yellow Line Is Run And Then It finished .


Step 10: When Flashing is completed, a Green Download Ok Logo will appear.


Step 11Now You Can Close the Smart Phone Flash Tool In your computer and disconnect your Android Smartphone from the computer .

Note =>  If You want To Flash Only User Data Or Recovery File So Tick Mark Only User Data Or Recovery File .
Deselect all parts except those one you want to flash and then press F9 Or Hit Download Button .



When You Click On The Download Button , The tool will immediately show a warning Message because not all parts are selected, but you should continue anyway, Safely press Yes.


Now Process To Flash Only One File Is Started And Compleated In Just A Minute .





Congratulations, Now your Smartphone is successfully Flashed With the Stock Rom you have Downloaded Or Only User Data Or Recovery File .


Intex Aqua Style 4.0Flash FileDownload
Intex Aqua Style 4.0Flash ToolDownload
Intex Aqua Style 4.0Usb DriverDownload
FacebookPageLike This

How To Flash Intex Aqua Style MTK Smartphone With SP Flash Tool

How To Flash Intex Aqua Style MTK Smartphone With SP Flash Tool


Unofficial support site for this Phone By Welcome Zone Haldwani

The Instructions Given Below To Flash Stock Rom Or Any Custom Rom Flash File Firmware using Smart Phone Flash Tool (SP Flash Tool) on Your Android MTK SmartPhone .

Requirements:
1=> Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.
2=> SP Flash Tool And Usb Drivers .
        You Can Download It From Last In The Post
3=> USB Cable.

Step 1Download and install Android USB Drivers on your computer From The Link Given Up. In case You Already Installed Android USB Drivers on your Computer then skip this step.


Step 2:  Then Next Step Is Power Off your Android Smartphone and remove the Battery (if it is removable).

Step 3Download And Extract the Stock Rom or Custom Rom that you want to Flash on your Smartphone .

Step 4Download and Extract Smart Phone Flash Tool on Your Computer. After Extracting you will be able to see the following files.

Step 5Now Open Flash_tool.exe .


Step 6When Smart Phone Flash Tool is launched , Click on the Scatter-Loading Button That Is On Right Side .



Step 7Now , Locate the Scatter File (Give The Path Of That File You Extracted In Your Computer).

Step 8Then Next Is Click on the Download Button to begin the Flashing Process.

After Clicking On The Download Button You Can See This Type Of Screen .

Step 9: Now, Connect your Android Smartphone to the Computer Via USB Cable (without battery- if it is removable).


Now One Red Line Is Run ThenThen One Voilet Line Then One Yellow Line Is Run And Then It finished .


Step 10: When Flashing is completed, a Green Download Ok Logo will appear.


Step 11Now You Can Close the Smart Phone Flash Tool In your computer and disconnect your Android Smartphone from the computer .

Note =>  If You want To Flash Only User Data Or Recovery File So Tick Mark Only User Data Or Recovery File .
Deselect all parts except those one you want to flash and then press F9 Or Hit Download Button .



When You Click On The Download Button , The tool will immediately show a warning Message because not all parts are selected, but you should continue anyway, Safely press Yes.


Now Process To Flash Only One File Is Started And Compleated In Just A Minute .





Congratulations, Now your Smartphone is successfully Flashed With the Stock Rom you have Downloaded Or Only User Data Or Recovery File .


Intex Aqua StyleFlash FileDownload
Intex Aqua StyleFlash ToolDownload
Intex Aqua StyleUsb DriverDownload
FacebookPageLike This


OSS Client The MultiBrand Online Tool Version 5.0 Setup Download

 OSS-Client "The MultiBrand Online Tool" Version 5.0 Released!!!


SAMSUNG GALAXY Update

Galaxy J1 Supported for Read Code -Direct Non Need root
Galaxy Z1 Supported for Read Code -Direct Non Need root
Galaxy TREND 2 Lite Supported for Read Code -Direct Non Need root
Galaxy S5Mini -Supported for Direct Unlock -Non Need root[SM-G800M/F/etc...]

Extra Feature

Non Need Diag port - for Spreadrum Based phone - Non Root!!
DIAG Port Enable for Devices with Lolipop OS "Android 5.x" - Need ROOT
Time Aprox for Read Code is 1.6 Seconds!!! - Non Need ROOT
Direct Unlock Supported In Galaxy Ace 4LTE -
Galaxy Feature - USB DATA Cable - Non Need UART C3300k or 530k Resistor


ALCATEL New Security- Update

Ony Need Download New Version of OSS-Client - Calculation Is FREE Non Need Buy New PACK or Activation!!! IMEI CALCULATION- Enjoy

OT-4003A - 16 DIGITS
OT-4003J - 16 DIGITS
OT-4009A - 16 DIGITS
OT-4009D - 16 DIGITS
OT-4009E - 16 DIGITS
OT-4009F - 16 DIGITS
OT-4009K - 16 DIGITS
OT-4009M - 16 DIGITS
OT-4009S - 16 DIGITS
OT-4009X - 16 DIGITS
OT-4013X - 16 DIGITS
OT-4013D - 16 DIGITS
OT-4013K - 16 DIGITS
OT-4013M - 16 DIGITS
OT-4013E - 16 DIGITS
OT-4037N - 16 DIGITS
OT-4037R - 16 DIGITS
OT-4037T - 16 DIGITS
OT-5017A - 16 DIGITS
OT-5017X - 16 DIGIT
OT-5017D - 16 DIGITS

Extra Models Added - IMEI Calculator 2015 - Updated

LANiX Brand Updated - Supported New Models FREE

W250
S420
S220
LX1
LX6
LX7
LX14
LX20


This Is ReDoP Edition!!!

GALAXY Test Report Real!!!

SAMSUNG Galaxy J1- Reading FREEZE CODE!! Success Non ROOT!!
SAMSUNG Galaxy J1 - Read Codes!! Non ROOT "BETA TEST Report"
SAMSUNG Galaxy Z1 - Reading Codes!! BETA Test report Success OK!
SAMSUN GALAXY Read Code Non ROOT!!! - SM-J100H Unfreezed Code Success!!!
SAMSUNG GALAXY ACE4 Direct Unlock Success OK!! -


WebSite

OSS Client | One software, many possibilities

How To Flash Intex Aqua Star L MTK Smartphone With SP Flash Tool

How To Flash Intex Aqua Star L MTK Smartphone With SP Flash Tool

Unofficial support site for this Phone By Welcome Zone Haldwani

The Instructions Given Below To Flash Stock Rom Or Any Custom Rom Flash File Firmware using Smart Phone Flash Tool (SP Flash Tool) on Your Android MTK SmartPhone .

Requirements:
1=> Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.
2=> SP Flash Tool And Usb Drivers .
        You Can Download It From Last In The Post
3=> USB Cable.

Step 1Download and install Android USB Drivers on your computer From The Link Given Up. In case You Already Installed Android USB Drivers on your Computer then skip this step.


Step 2:  Then Next Step Is Power Off your Android Smartphone and remove the Battery (if it is removable).

Step 3Download And Extract the Stock Rom or Custom Rom that you want to Flash on your Smartphone .

Step 4Download and Extract Smart Phone Flash Tool on Your Computer. After Extracting you will be able to see the following files.

Step 5Now Open Flash_tool.exe .


Step 6When Smart Phone Flash Tool is launched , Click on the Scatter-Loading Button That Is On Right Side .



Step 7Now , Locate the Scatter File (Give The Path Of That File You Extracted In Your Computer).

Step 8Then Next Is Click on the Download Button to begin the Flashing Process.

After Clicking On The Download Button You Can See This Type Of Screen .

Step 9: Now, Connect your Android Smartphone to the Computer Via USB Cable (without battery- if it is removable).


Now One Red Line Is Run ThenThen One Voilet Line Then One Yellow Line Is Run And Then It finished .


Step 10: When Flashing is completed, a Green Download Ok Logo will appear.


Step 11Now You Can Close the Smart Phone Flash Tool In your computer and disconnect your Android Smartphone from the computer .

Note =>  If You want To Flash Only User Data Or Recovery File So Tick Mark Only User Data Or Recovery File .
Deselect all parts except those one you want to flash and then press F9 Or Hit Download Button .



When You Click On The Download Button , The tool will immediately show a warning Message because not all parts are selected, but you should continue anyway, Safely press Yes.


Now Process To Flash Only One File Is Started And Compleated In Just A Minute .





Congratulations, Now your Smartphone is successfully Flashed With the Stock Rom you have Downloaded Or Only User Data Or Recovery File .


Intex Aqua Star LFlash FileDownload
Intex Aqua Star LFlash ToolDownload
Intex Aqua Star LUsb DriverDownload
FacebookPageLike This

Z3X Box Easy JTAG v 2.0.5.0 Released

EasyJTAG Release v2.0.5.0. Direct eMMC ODIN flasher added. 



Unofficial support site  By Welcome Zone Haldwani


New plugin: Direct eMMC ODIN flasher 

We have made new beautiful standalone tool called Direct eMMC ODIN flasher.
This tool allow to write Samsung Factory images + PIT files directly
on eMMC card or SD card for later boot recovery. There is no matter
what version reside inside killed phone. Big thanks to tihiy_grom for
porting libpit to delphi and his great 






You don't need to search new SDC
You don't need to search new DUMP

Just download latest tar.gz firmware from z3x support.
Select PIT and partitions , necesary to write and write it on eMMC.
Phone will be reprtitioned and in bootable codition.

Ever more our tool able to flash whole Samsung tar.gz Image to eMMC ( beta ) to
make phone full ok codition. You need only fix IMEI.


There is also some changes in EasyJTAG Main software:

- eMMC Read , Write and Erase buttons are moved now in separate tab , called
[Flasher] there its more flexible by opinions of many our users.
- added [Write All] button. Now you dont need swith ROM1 / ROM2 / ROM3
by yourself. Just select 3 files and tick [Write ALL] thanks BABAK NURI for
this great idea.






Added:

- HTC8X –ћ2330000 + CPUID 0x707910E1 to supported list;
- HW reset capbility enable bit is byte 162 in card EXT_CSD
register, only version4.4 card or later.HW reset feature can be used
to reset eMMC card when occures timeout errors during read/write/erase.

The EXT_CSD_RST_N_FUNCTION can be set to one of values:

EXT_CSD_HW_RESET_EN 01
EXT_CSD_HW_RESET_DIS 02

Or it can left in unprogrammed state 0x00. Beware - this value are OTP
and can be programmed one time in most eMMC cards. Samsung is exception
and this value are resetted to 0x00 with MoviNAND factory reset.


Fixed:

- "Error calling init()" error if init file is corrupted
- "error purging CDC device: 0" error if init file is corrupted

P.S. Lot of phone will be added in upcoming update. Be ready.

How To Flash Intex Aqua Star Power MTK Smartphone With SP Flash Tool

How To Flash Intex Aqua Star Power MTK Smartphone With SP Flash Tool



Unofficial support site for this Phone By Welcome Zone Haldwani

The Instructions Given Below To Flash Stock Rom Or Any Custom Rom Flash File Firmware using Smart Phone Flash Tool (SP Flash Tool) on Your Android MTK SmartPhone .

Requirements:
1=> Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.
2=> SP Flash Tool And Usb Drivers .
        You Can Download It From Last In The Post
3=> USB Cable.

Step 1Download and install Android USB Drivers on your computer From The Link Given Up. In case You Already Installed Android USB Drivers on your Computer then skip this step.


Step 2:  Then Next Step Is Power Off your Android Smartphone and remove the Battery (if it is removable).

Step 3Download And Extract the Stock Rom or Custom Rom that you want to Flash on your Smartphone .

Step 4Download and Extract Smart Phone Flash Tool on Your Computer. After Extracting you will be able to see the following files.

Step 5Now Open Flash_tool.exe .


Step 6When Smart Phone Flash Tool is launched , Click on the Scatter-Loading Button That Is On Right Side .



Step 7Now , Locate the Scatter File (Give The Path Of That File You Extracted In Your Computer).

Step 8Then Next Is Click on the Download Button to begin the Flashing Process.

After Clicking On The Download Button You Can See This Type Of Screen .

Step 9: Now, Connect your Android Smartphone to the Computer Via USB Cable (without battery- if it is removable).


Now One Red Line Is Run ThenThen One Voilet Line Then One Yellow Line Is Run And Then It finished .


Step 10: When Flashing is completed, a Green Download Ok Logo will appear.


Step 11Now You Can Close the Smart Phone Flash Tool In your computer and disconnect your Android Smartphone from the computer .

Note =>  If You want To Flash Only User Data Or Recovery File So Tick Mark Only User Data Or Recovery File .
Deselect all parts except those one you want to flash and then press F9 Or Hit Download Button .



When You Click On The Download Button , The tool will immediately show a warning Message because not all parts are selected, but you should continue anyway, Safely press Yes.


Now Process To Flash Only One File Is Started And Compleated In Just A Minute .





Congratulations, Now your Smartphone is successfully Flashed With the Stock Rom you have Downloaded Or Only User Data Or Recovery File .


Intex Aqua Star powerFlash FileDownload
Intex Aqua Star powerFlash ToolDownload
Intex Aqua Star powerUsb DriverDownload
FacebookPageLike This

computer science course online | computer science degree syllabus | computer science help online | computer science learn online | computer science lectures online | computer science online course | cs final subjects | cs online school | degree computer | degree in programming | free computer classes online | free online computer classes | intro to computer science online | learn computer science online | learn computer science online free | mit computer science online | msc computer science online | online bachelor in computer science | online bachelor of computer science | online bsc computer science | online computer classes | online computer classes free | online computer coding classes | online computer coding courses | online masters cs | online ms in cs | online msc computer science | online projects for computer science students | programming degree | teach computer science online | what is computer science degree

Labels

brand new desktop computers
cheap refurbished laptops
computer desktop packages
computer discount
desktop computer new
desktop computer package deals
desktop computer packages
desktop pc package deals
desktop pc packages
discount computer parts
discount computers
discount desktop computers
discount laptop computers
laptop computer sales
laptop computers for sale
laptop sale
laptops for sale
new computer desktop
new desktop
new desktop computer
new desktop computer with windows 7
new desktop pc
new pc desktop
new windows 7 desktop computers
pc desktop package
refurbished computers
refurbished desktop computers
refurbished laptops
refurbished notebooks
refurbished pc
used laptop for sale