How To Flash karbonn Sparkle V MTK Smartphone With SP Flash Tools

How To Flash karbonn Sparkle V MTK Smartphone With SP Flash Tools

Unofficial support site for this Phone By Welcome Zone Haldwani

The Instructions Given Below To Flash Stock Rom Or Any Custom Rom Flash File Firmware using Smart Phone Flash Tool (SP Flash Tool) on Your Android MTK SmartPhone .

Requirements:

1=> Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.

2=> SP Flash Tool And Usb Drivers .

        You Can Download It From Last In The Post

3=> USB Cable.

Step 1: Download and install Android USB Drivers on your computer From The Link Given Up. In case You Already Installed Android USB Drivers on your Computer then skip this step.

Step 2:  Then Next Step Is Power Off your Android Smartphone and remove the Battery (if it is removable).

Step 3: Download And Extract the Stock Rom or Custom Rom that you want to Flash on your Smartphone .

Step 4: Download and Extract Smart Phone Flash Tool on Your Computer. After Extracting you will be able to see the following files.

Step 5: Now Open Flash_tool.exe .

Step 6: When Smart Phone Flash Tool is launched , Click on the Scatter-Loading Button That Is On Right Side .

Step 7: Now , Locate the Scatter File (Give The Path Of That File You Extracted In Your Computer).

Step 8: Then Next Is Click on the Download Button to begin the Flashing Process.

After Clicking On The Download Button You Can See This Type Of Screen .

Step 9: Now, Connect your Android Smartphone to the Computer Via USB Cable (without battery- if it is removable).

Now One Red Line Is Run ThenThen One Voilet Line Then One Yellow Line Is Run And Then It finished .

Step 10: When Flashing is completed, a Green Download Ok Logo will appear.

Step 11: Now You Can Close the Smart Phone Flash Tool In your computer and disconnect your Android Smartphone from the computer .

Note =>  If You want To Flash Only User Data Or Recovery File So Tick Mark Only User Data Or Recovery File .

Deselect all parts except those one you want to flash and then press F9 Or Hit Download Button .

When You Click On The Download Button , The tool will immediately show a warning Message because not all parts are selected, but you should continue anyway, Safely press Yes.

Now Process To Flash Only One File Is Started And Compleated In Just A Minute .

Congratulations, Now your Smartphone is successfully Flashed With the Stock Rom you have Downloaded Or Only User Data Or Recovery File .

karbonn Sparkle V	Flash File	Download
karbonn Sparkle V	Flash Tool	Download
karbonn Sparkle V	Usb Driver	Download
Facebook	Page	Like This

Read More

How To Flash Micromax A66 Speadtrum (.Pac) Flash File Stock Rom on Android

How To Flash Micromax A66 Speadtrum (Pac) Flash File Stock Rom

Unofficial Support Site For This Phone By Welcome Zone haldwani

The Instructions Given Below To Flash Stock Rom Or Any Custom Rom Flash File Firmware using Smart Spreadtrum Android Flash Tool Smart Phone .

Requirements:

1=  Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.
2=  Upgrade Download Tool And Usb Drivers .
3=  USB Cable.

Flash: To overwrite your phones existing software with another.
Rom: Firmware for your phone.
.pac file: File in which research download uses

Before this it is important to have the VCOM drivers for you phone installed on your computer. (Links Below)

To start go ahead and press the first gear button. This will open up a browse menu

Use the menu to browse for where your .pac file for your phone is saved. These files are usually given
from the phones manufacture. The browse menu can only open .pac files.

Once the file is loaded you can tell, you will be able to see the name on the bar (as shown).
Next press the second gear to open up the settings menu.

1. How much to port (self explanatory)
2. Bautrate. Leave this at 115200 unless your phone manufacture said otherwise. This works for the SC6820.
3. This will be automatically selected once you load the .pac file.
4. Where all the files are stored. You can actually extract these once you load a .pac file hehe :P .
5. Name of Each file. If its ticked it will be flashed. You can untick things you don't want to be flashed.
6. This is just if your going to build a .pac file from parts, don't worry about it that's a whole other thing.

Once your don't editing the settings you can go ahead and press Ok.

After your done press the arrow like button. This will start the process and have it ready for your phone.
Take the battery out of your phone now for at least 15 seconds. Place it back and plug in the usb while
simultaneously holding the volume down button. You should see in research download that it has started
flashing! ( You can let go of the volume key now :P) When it is finished just press the stop button and
disconnect your phone!

VIDEO TUTORIAL 

Congratulation Your Flash Successfully Flash Enjoy :-

Micromax A66	Usb Driver	Download
Micromax A66	Flash Tool	Download
Micromax A66	Flash File	Download
Facebook	Like This	Download

Read More

How To Flash karbonn Titanium Octane MTK Smartphone With SP Flash Tools

How To Flash karbonnTitanium Octane MTK Smartphone With SP Flash Tools

Unofficial support site for this Phone By Welcome Zone Haldwani

The Instructions Given Below To Flash Stock Rom Or Any Custom Rom Flash File Firmware using Smart Phone Flash Tool (SP Flash Tool) on Your Android MTK SmartPhone .

Requirements:

1=> Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.

2=> SP Flash Tool And Usb Drivers .

        You Can Download It From Last In The Post

3=> USB Cable.

Step 1: Download and install Android USB Drivers on your computer From The Link Given Up. In case You Already Installed Android USB Drivers on your Computer then skip this step.

Step 2:  Then Next Step Is Power Off your Android Smartphone and remove the Battery (if it is removable).

Step 3: Download And Extract the Stock Rom or Custom Rom that you want to Flash on your Smartphone .

Step 4: Download and Extract Smart Phone Flash Tool on Your Computer. After Extracting you will be able to see the following files.

Step 5: Now Open Flash_tool.exe .

Step 6: When Smart Phone Flash Tool is launched , Click on the Scatter-Loading Button That Is On Right Side .

Step 7: Now , Locate the Scatter File (Give The Path Of That File You Extracted In Your Computer).

Step 8: Then Next Is Click on the Download Button to begin the Flashing Process.

After Clicking On The Download Button You Can See This Type Of Screen .

Step 9: Now, Connect your Android Smartphone to the Computer Via USB Cable (without battery- if it is removable).

Now One Red Line Is Run ThenThen One Voilet Line Then One Yellow Line Is Run And Then It finished .

Step 10: When Flashing is completed, a Green Download Ok Logo will appear.

Step 11: Now You Can Close the Smart Phone Flash Tool In your computer and disconnect your Android Smartphone from the computer .

Note =>  If You want To Flash Only User Data Or Recovery File So Tick Mark Only User Data Or Recovery File .

Deselect all parts except those one you want to flash and then press F9 Or Hit Download Button .

When You Click On The Download Button , The tool will immediately show a warning Message because not all parts are selected, but you should continue anyway, Safely press Yes.

Now Process To Flash Only One File Is Started And Compleated In Just A Minute .

Congratulations, Now your Smartphone is successfully Flashed With the Stock Rom you have Downloaded Or Only User Data Or Recovery File .

karbonn Titanium Octane	Flash File	Download
karbonn Titanium Octane	Flash Tool	Download
karbonn Titanium Octane	Usb Driver	Download
Facebook	Page	Like This

Read More

How To Flash Micromax A67 Speadtrum (.Pac) Flash File Stock Rom on Android

How To Flash Micromax A67 Speadtrum (Pac) Flash File Stock Rom

Unofficial Support Site For This Phone By Welcome Zone haldwani

The Instructions Given Below To Flash Stock Rom Or Any Custom Rom Flash File Firmware using Smart Spreadtrum Android Flash Tool Smart Phone .

Requirements:

1=  Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.
2=  Upgrade Download Tool And Usb Drivers .
3=  USB Cable.

Flash: To overwrite your phones existing software with another.
Rom: Firmware for your phone.
.pac file: File in which research download uses

Before this it is important to have the VCOM drivers for you phone installed on your computer. (Links Below)

To start go ahead and press the first gear button. This will open up a browse menu

Use the menu to browse for where your .pac file for your phone is saved. These files are usually given
from the phones manufacture. The browse menu can only open .pac files.

Once the file is loaded you can tell, you will be able to see the name on the bar (as shown).
Next press the second gear to open up the settings menu.

1. How much to port (self explanatory)
2. Bautrate. Leave this at 115200 unless your phone manufacture said otherwise. This works for the SC6820.
3. This will be automatically selected once you load the .pac file.
4. Where all the files are stored. You can actually extract these once you load a .pac file hehe :P .
5. Name of Each file. If its ticked it will be flashed. You can untick things you don't want to be flashed.
6. This is just if your going to build a .pac file from parts, don't worry about it that's a whole other thing.

Once your don't editing the settings you can go ahead and press Ok.

After your done press the arrow like button. This will start the process and have it ready for your phone.
Take the battery out of your phone now for at least 15 seconds. Place it back and plug in the usb while
simultaneously holding the volume down button. You should see in research download that it has started
flashing! ( You can let go of the volume key now :P) When it is finished just press the stop button and
disconnect your phone!

VIDEO TUTORIAL 

Congratulation Your Flash Successfully Flash Enjoy :-

Micromax A67	Usb Driver	Download
Micromax A67	Flash Tool	Download
Micromax A67	Flash File	Download
Facebook	Like This	Download

Read More

How To Flash karbonn Titanium Octane Plus MTK Smartphone With SP Flash Tools

How To Flash karbonn Titanium Octane Plus MTK Smartphone With SP Flash Tools

Unofficial support site for this Phone By Welcome Zone Haldwani

The Instructions Given Below To Flash Stock Rom Or Any Custom Rom Flash File Firmware using Smart Phone Flash Tool (SP Flash Tool) on Your Android MTK SmartPhone .

Requirements:

1=> Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.

2=> SP Flash Tool And Usb Drivers .

        You Can Download It From Last In The Post

3=> USB Cable.

Step 1: Download and install Android USB Drivers on your computer From The Link Given Up. In case You Already Installed Android USB Drivers on your Computer then skip this step.

Step 2:  Then Next Step Is Power Off your Android Smartphone and remove the Battery (if it is removable).

Step 3: Download And Extract the Stock Rom or Custom Rom that you want to Flash on your Smartphone .

Step 4: Download and Extract Smart Phone Flash Tool on Your Computer. After Extracting you will be able to see the following files.

Step 5: Now Open Flash_tool.exe .

Step 6: When Smart Phone Flash Tool is launched , Click on the Scatter-Loading Button That Is On Right Side .

Step 7: Now , Locate the Scatter File (Give The Path Of That File You Extracted In Your Computer).

Step 8: Then Next Is Click on the Download Button to begin the Flashing Process.

After Clicking On The Download Button You Can See This Type Of Screen .

Step 9: Now, Connect your Android Smartphone to the Computer Via USB Cable (without battery- if it is removable).

Now One Red Line Is Run ThenThen One Voilet Line Then One Yellow Line Is Run And Then It finished .

Step 10: When Flashing is completed, a Green Download Ok Logo will appear.

Step 11: Now You Can Close the Smart Phone Flash Tool In your computer and disconnect your Android Smartphone from the computer .

Note =>  If You want To Flash Only User Data Or Recovery File So Tick Mark Only User Data Or Recovery File .

Deselect all parts except those one you want to flash and then press F9 Or Hit Download Button .

When You Click On The Download Button , The tool will immediately show a warning Message because not all parts are selected, but you should continue anyway, Safely press Yes.

Now Process To Flash Only One File Is Started And Compleated In Just A Minute .

Congratulations, Now your Smartphone is successfully Flashed With the Stock Rom you have Downloaded Or Only User Data Or Recovery File .

karbonn Titanium Octane Plus	Flash File	Download
karbonn Titanium Octane Plus	Flash Tool	Download
karbonn Titanium Octane Plus	Usb Driver	Download
Facebook	Page	Like This

Read More

How To Flash Micromax A69 Speadtrum (.Pac) Flash File Stock Rom on Android

How To Flash Micromax A69 Speadtrum (Pac) Flash File Stock Rom

Unofficial Support Site For This Phone By Welcome Zone haldwani

The Instructions Given Below To Flash Stock Rom Or Any Custom Rom Flash File Firmware using Smart Spreadtrum Android Flash Tool Smart Phone .

Requirements:

1=  Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.
2=  Upgrade Download Tool And Usb Drivers .
3=  USB Cable.

Flash: To overwrite your phones existing software with another.
Rom: Firmware for your phone.
.pac file: File in which research download uses

Before this it is important to have the VCOM drivers for you phone installed on your computer. (Links Below)

To start go ahead and press the first gear button. This will open up a browse menu

Use the menu to browse for where your .pac file for your phone is saved. These files are usually given
from the phones manufacture. The browse menu can only open .pac files.

Once the file is loaded you can tell, you will be able to see the name on the bar (as shown).
Next press the second gear to open up the settings menu.

1. How much to port (self explanatory)
2. Bautrate. Leave this at 115200 unless your phone manufacture said otherwise. This works for the SC6820.
3. This will be automatically selected once you load the .pac file.
4. Where all the files are stored. You can actually extract these once you load a .pac file hehe :P .
5. Name of Each file. If its ticked it will be flashed. You can untick things you don't want to be flashed.
6. This is just if your going to build a .pac file from parts, don't worry about it that's a whole other thing.

Once your don't editing the settings you can go ahead and press Ok.

After your done press the arrow like button. This will start the process and have it ready for your phone.
Take the battery out of your phone now for at least 15 seconds. Place it back and plug in the usb while
simultaneously holding the volume down button. You should see in research download that it has started
flashing! ( You can let go of the volume key now :P) When it is finished just press the stop button and
disconnect your phone!

VIDEO TUTORIAL 

Congratulation Your Flash Successfully Flash Enjoy :-

Micromax A69	Usb Driver	Download
Micromax A69	Flash Tool	Download
Micromax A69	Flash File	Download
Facebook	Like This	Download

Read More

Micromax A71 Firmware Flash file and flash tool Download

Download all latest version official working ROM of Micromax A71 free

Now a days everything is on the internet every solution every way anything is on the internet like if my Micromax A71 comes in a problem so firstly i search on the internet for its solution that is why this page is created here below are the some of the software related problems and its solutions

Some software Problem related to Micromax A71 and its free solutions

1. Micromax A71 Dead - This is the major problem which is faced by many users that their smartphone get dead some users says " my smartphone not going power on " this is why because the phone operating system get corrupted because of unusual applications and virus problem or sometimes roughly used .
2. My Micromax A71 Restarts automatically sometimes during calling or freeze on welcome logo screen
3. smartphone Processing gets very slow and sometimes it may be jammed or hang or freeze problem
4. Some application or new one updates of phone not working and suddenly close after showing error
5. problem of phone Booting and operating of RAM , windows or operating system not started correctly
6. some of the functions and apps like Camera , Display , touch , keypad and many more not working
7. Sometimes Micromax A71 is not accepting any of sim card and showing error like " no sim card found "
8. Network of my smartphone suddenly get lost for sometime or permanently not solved after searching

How to solve these problems in a very simple way with 100% assurance

If All these problems are coming in your Micromax A71 so it means you have to flash your phone with the latest version firmware by using appropriate flash tool and usb drivers and rom file

Micromax A71 Flash File

Firmware

Micromax A71 Firmware Download

File Password  Is >>    androidflashfile.com

Micromax A71 Flash tool

Micromax A71 usb drivers

How to Flash imei tool

Micromax A71 How to Flash

NOTE - Before starting flashing take backup or the phone Use data recovery because flashing process will erase all your personal data like Contacts , picture web , text, etc ,and your phone battery should be charge  minimum upto 50% 

Flashing may be void your Micromax A71 warranty so if your phone is in warranty session so first go to customer care center .

FOLLOW US ON              FACEBOOK
TRY OUR ANDROID      APP

Read More