How To Flash karbonn A4 MTK Smartphone With SP Flash Tools

How To Flash karbonn A4 MTK Smartphone With SP Flash Tools

Unofficial support site for this Phone By Welcome Zone Haldwani

The Instructions Given Below To Flash Stock Rom Or Any Custom Rom Flash File Firmware using Smart Phone Flash Tool (SP Flash Tool) on Your Android MTK SmartPhone .

Requirements:

1=> Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.

2=> SP Flash Tool And Usb Drivers .

        You Can Download It From Last In The Post

3=> USB Cable.

Step 1: Download and install Android USB Drivers on your computer From The Link Given Up. In case You Already Installed Android USB Drivers on your Computer then skip this step.

Step 2:  Then Next Step Is Power Off your Android Smartphone and remove the Battery (if it is removable).

Step 3: Download And Extract the Stock Rom or Custom Rom that you want to Flash on your Smartphone .

Step 4: Download and Extract Smart Phone Flash Tool on Your Computer. After Extracting you will be able to see the following files.

Step 5: Now Open Flash_tool.exe .

Step 6: When Smart Phone Flash Tool is launched , Click on the Scatter-Loading Button That Is On Right Side .

Step 7: Now , Locate the Scatter File (Give The Path Of That File You Extracted In Your Computer).

Step 8: Then Next Is Click on the Download Button to begin the Flashing Process.

After Clicking On The Download Button You Can See This Type Of Screen .

Step 9: Now, Connect your Android Smartphone to the Computer Via USB Cable (without battery- if it is removable).

Now One Red Line Is Run ThenThen One Voilet Line Then One Yellow Line Is Run And Then It finished .

Step 10: When Flashing is completed, a Green Download Ok Logo will appear.

Step 11: Now You Can Close the Smart Phone Flash Tool In your computer and disconnect your Android Smartphone from the computer .

Note =>  If You want To Flash Only User Data Or Recovery File So Tick Mark Only User Data Or Recovery File .

Deselect all parts except those one you want to flash and then press F9 Or Hit Download Button .

When You Click On The Download Button , The tool will immediately show a warning Message because not all parts are selected, but you should continue anyway, Safely press Yes.

Now Process To Flash Only One File Is Started And Compleated In Just A Minute .

Congratulations, Now your Smartphone is successfully Flashed With the Stock Rom you have Downloaded Or Only User Data Or Recovery File .

karbonn A4	Flash File	Download
karbonn A4	Flash Tool	Download
karbonn A4	Usb Driver	Download
Facebook	Page	Like This

Read More

How To Flash karbonn A5s MTK Smartphone With SP Flash Tools

How To Flash karbonn A5s MTK Smartphone With SP Flash Tools

Unofficial support site for this Phone By Welcome Zone Haldwani

The Instructions Given Below To Flash Stock Rom Or Any Custom Rom Flash File Firmware using Smart Phone Flash Tool (SP Flash Tool) on Your Android MTK SmartPhone .

Requirements:

1=> Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.

2=> SP Flash Tool And Usb Drivers .

        You Can Download It From Last In The Post

3=> USB Cable.

Step 1: Download and install Android USB Drivers on your computer From The Link Given Up. In case You Already Installed Android USB Drivers on your Computer then skip this step.

Step 2:  Then Next Step Is Power Off your Android Smartphone and remove the Battery (if it is removable).

Step 3: Download And Extract the Stock Rom or Custom Rom that you want to Flash on your Smartphone .

Step 4: Download and Extract Smart Phone Flash Tool on Your Computer. After Extracting you will be able to see the following files.

Step 5: Now Open Flash_tool.exe .

Step 6: When Smart Phone Flash Tool is launched , Click on the Scatter-Loading Button That Is On Right Side .

Step 7: Now , Locate the Scatter File (Give The Path Of That File You Extracted In Your Computer).

Step 8: Then Next Is Click on the Download Button to begin the Flashing Process.

After Clicking On The Download Button You Can See This Type Of Screen .

Step 9: Now, Connect your Android Smartphone to the Computer Via USB Cable (without battery- if it is removable).

Now One Red Line Is Run ThenThen One Voilet Line Then One Yellow Line Is Run And Then It finished .

Step 10: When Flashing is completed, a Green Download Ok Logo will appear.

Step 11: Now You Can Close the Smart Phone Flash Tool In your computer and disconnect your Android Smartphone from the computer .

Note =>  If You want To Flash Only User Data Or Recovery File So Tick Mark Only User Data Or Recovery File .

Deselect all parts except those one you want to flash and then press F9 Or Hit Download Button .

When You Click On The Download Button , The tool will immediately show a warning Message because not all parts are selected, but you should continue anyway, Safely press Yes.

Now Process To Flash Only One File Is Started And Compleated In Just A Minute .

Congratulations, Now your Smartphone is successfully Flashed With the Stock Rom you have Downloaded Or Only User Data Or Recovery File .

karbonn A5s	Flash File	Download
karbonn A5s	Flash Tool	Download
karbonn A5s	Usb Driver	Download
Facebook	Page	Like This

Read More

How To Flash karbonn A6 Speadtrum (Pac) Flash File Stock Rom

How To Flash karbonn A6 Speadtrum (Pac) Flash File Stock Rom

Unofficial Support Site For This Phone By Welcome Zone haldwani

The Instructions Given Below To Flash Stock Rom Or Any Custom Rom Flash File Firmware using Smart Spreadtrum Android Flash Tool Smart Phone .

Requirements:

1=  Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.
2=  Upgrade Download Tool And Usb Drivers .
3=  USB Cable.

Flash: To overwrite your phones existing software with another.
Rom: Firmware for your phone.
.pac file: File in which research download uses

Before this it is important to have the VCOM drivers for you phone installed on your computer. (Links Below)

To start go ahead and press the first gear button. This will open up a browse menu

Use the menu to browse for where your .pac file for your phone is saved. These files are usually given
from the phones manufacture. The browse menu can only open .pac files.

Once the file is loaded you can tell, you will be able to see the name on the bar (as shown).
Next press the second gear to open up the settings menu.

1. How much to port (self explanatory)
2. Bautrate. Leave this at 115200 unless your phone manufacture said otherwise. This works for the SC6820.
3. This will be automatically selected once you load the .pac file.
4. Where all the files are stored. You can actually extract these once you load a .pac file hehe :P .
5. Name of Each file. If its ticked it will be flashed. You can untick things you don't want to be flashed.
6. This is just if your going to build a .pac file from parts, don't worry about it that's a whole other thing.

Once your don't editing the settings you can go ahead and press Ok.

After your done press the arrow like button. This will start the process and have it ready for your phone.
Take the battery out of your phone now for at least 15 seconds. Place it back and plug in the usb while
simultaneously holding the volume down button. You should see in research download that it has started
flashing! ( You can let go of the volume key now :P) When it is finished just press the stop button and
disconnect your phone!

VIDEO TUTORIAL 

Congratulation Your Flash Successfully Flash Enjoy :-

karbonn A6	Usb Driver	Download
karbonn A6	Flash Tool	Download
karbonn A6	Flash File	Download
Facebook	Like This	Download

Read More

How To Flash karbonn A6 Plus Speadtrum (Pac) Flash File Stock Rom

How To Flash karbonn A6 Plus Speadtrum (Pac) Flash File Stock Rom

Unofficial Support Site For This Phone By Welcome Zone haldwani

The Instructions Given Below To Flash Stock Rom Or Any Custom Rom Flash File Firmware using Smart Spreadtrum Android Flash Tool Smart Phone .

Requirements:

1=  Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.
2=  Upgrade Download Tool And Usb Drivers .
3=  USB Cable.

Flash: To overwrite your phones existing software with another.
Rom: Firmware for your phone.
.pac file: File in which research download uses

Before this it is important to have the VCOM drivers for you phone installed on your computer. (Links Below)

To start go ahead and press the first gear button. This will open up a browse menu

Use the menu to browse for where your .pac file for your phone is saved. These files are usually given
from the phones manufacture. The browse menu can only open .pac files.

Once the file is loaded you can tell, you will be able to see the name on the bar (as shown).
Next press the second gear to open up the settings menu.

1. How much to port (self explanatory)
2. Bautrate. Leave this at 115200 unless your phone manufacture said otherwise. This works for the SC6820.
3. This will be automatically selected once you load the .pac file.
4. Where all the files are stored. You can actually extract these once you load a .pac file hehe :P .
5. Name of Each file. If its ticked it will be flashed. You can untick things you don't want to be flashed.
6. This is just if your going to build a .pac file from parts, don't worry about it that's a whole other thing.

Once your don't editing the settings you can go ahead and press Ok.

After your done press the arrow like button. This will start the process and have it ready for your phone.
Take the battery out of your phone now for at least 15 seconds. Place it back and plug in the usb while
simultaneously holding the volume down button. You should see in research download that it has started
flashing! ( You can let go of the volume key now :P) When it is finished just press the stop button and
disconnect your phone!

VIDEO TUTORIAL 

Congratulation Your Flash Successfully Flash Enjoy :-

karbonn A6 Plus	Usb Driver	Download
karbonn A6 Plus	Flash Tool	Download
karbonn A6 Plus	Flash File	Download
Facebook	Like This	Download

Read More

How To Flash karbonn A7 Star MTK Smartphone With SP Flash Tools

How To Flash karbonn A7 Star MTK Smartphone With SP Flash Tools

Unofficial support site for this Phone By Welcome Zone Haldwani

The Instructions Given Below To Flash Stock Rom Or Any Custom Rom Flash File Firmware using Smart Phone Flash Tool (SP Flash Tool) on Your Android MTK SmartPhone .

Requirements:

1=> Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.

2=> SP Flash Tool And Usb Drivers .

        You Can Download It From Last In The Post

3=> USB Cable.

Step 1: Download and install Android USB Drivers on your computer From The Link Given Up. In case You Already Installed Android USB Drivers on your Computer then skip this step.

Step 2:  Then Next Step Is Power Off your Android Smartphone and remove the Battery (if it is removable).

Step 3: Download And Extract the Stock Rom or Custom Rom that you want to Flash on your Smartphone .

Step 4: Download and Extract Smart Phone Flash Tool on Your Computer. After Extracting you will be able to see the following files.

Step 5: Now Open Flash_tool.exe .

Step 6: When Smart Phone Flash Tool is launched , Click on the Scatter-Loading Button That Is On Right Side .

Step 7: Now , Locate the Scatter File (Give The Path Of That File You Extracted In Your Computer).

Step 8: Then Next Is Click on the Download Button to begin the Flashing Process.

After Clicking On The Download Button You Can See This Type Of Screen .

Step 9: Now, Connect your Android Smartphone to the Computer Via USB Cable (without battery- if it is removable).

Now One Red Line Is Run ThenThen One Voilet Line Then One Yellow Line Is Run And Then It finished .

Step 10: When Flashing is completed, a Green Download Ok Logo will appear.

Step 11: Now You Can Close the Smart Phone Flash Tool In your computer and disconnect your Android Smartphone from the computer .

Note =>  If You want To Flash Only User Data Or Recovery File So Tick Mark Only User Data Or Recovery File .

Deselect all parts except those one you want to flash and then press F9 Or Hit Download Button .

When You Click On The Download Button , The tool will immediately show a warning Message because not all parts are selected, but you should continue anyway, Safely press Yes.

Now Process To Flash Only One File Is Started And Compleated In Just A Minute .

Congratulations, Now your Smartphone is successfully Flashed With the Stock Rom you have Downloaded Or Only User Data Or Recovery File .

karbonn A7 Star	Flash File	Download
karbonn A7 Star	Flash Tool	Download
karbonn A7 Star	Usb Driver	Download
Facebook	Page	Like This

Read More

How To Flash karbonn A9s Speadtrum (Pac) Flash File Stock Rom

How To Flash karbonn A9s Speadtrum (Pac) Flash File Stock Rom

Unofficial Support Site For This Phone By Welcome Zone haldwani

The Instructions Given Below To Flash Stock Rom Or Any Custom Rom Flash File Firmware using Smart Spreadtrum Android Flash Tool Smart Phone .

Requirements:

1=  Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.
2=  Upgrade Download Tool And Usb Drivers .
3=  USB Cable.

Flash: To overwrite your phones existing software with another.
Rom: Firmware for your phone.
.pac file: File in which research download uses

Before this it is important to have the VCOM drivers for you phone installed on your computer. (Links Below)

To start go ahead and press the first gear button. This will open up a browse menu

Use the menu to browse for where your .pac file for your phone is saved. These files are usually given
from the phones manufacture. The browse menu can only open .pac files.

Once the file is loaded you can tell, you will be able to see the name on the bar (as shown).
Next press the second gear to open up the settings menu.

1. How much to port (self explanatory)
2. Bautrate. Leave this at 115200 unless your phone manufacture said otherwise. This works for the SC6820.
3. This will be automatically selected once you load the .pac file.
4. Where all the files are stored. You can actually extract these once you load a .pac file hehe :P .
5. Name of Each file. If its ticked it will be flashed. You can untick things you don't want to be flashed.
6. This is just if your going to build a .pac file from parts, don't worry about it that's a whole other thing.

Once your don't editing the settings you can go ahead and press Ok.

After your done press the arrow like button. This will start the process and have it ready for your phone.
Take the battery out of your phone now for at least 15 seconds. Place it back and plug in the usb while
simultaneously holding the volume down button. You should see in research download that it has started
flashing! ( You can let go of the volume key now :P) When it is finished just press the stop button and
disconnect your phone!

VIDEO TUTORIAL 

Congratulation Your Flash Successfully Flash Enjoy :-

karbonn A9s	Usb Driver	Download
karbonn A9s	Flash Tool	Download
karbonn A9s	Flash File	Download
Facebook	Like This	Download

Read More