Thursday, October 13, 2016

Oss Client 7.1 Setup Download

Oss Client 7.1 Imei Calc Free And Unlimited Like Always No Need Pay Anything

BEELINE:-
BEELINE C201 Corrected Code



Alcatel:-
OT-1054, 
OT-1054D, 
OT-2051 16 Digits



Pantech:-
Pantech PG-1400,
 Pantech PG-1900, 
Pantech PG-C3, 
Pantech PG-C300




Doro:-
HandleEasy 328GSM
,
HandleEasy 330GSM,
HandlePlus 326iGSM,
HandlePlus 334GSM,
HandlePlus 334GSM IUP,
HandlePlus 338GSM,
PhoneEasy 332GSM,
PhoneEasy 338GSM,
PhoneEasy 341GSM,
PhoneEasy 342GSM,
PhoneEasy 505,
PhoneEasy 510
,
PhoneEasy 515
,
PhoneEasy 605,
PhoneEasy 614
,
PhoneEasy 615,
PhoneEasy 715


VIRGIN VM595


UNITE Smart 100 Moldova 
NOS NOVU
BMOBILE:-
AX700
 SMARTFREN Wide

SFR:-
522
SFR
StarAddict

StarExt
StarNaute
StarShine
StarTrail
511

551

VERYKOOL:-


VERYKOOL I230


Longcheer:-
Longcheer WM66

Longcheer WM66A

Longcheer WM66E

Longcheer WM71

Longcheer WM72

Medusa PRO v 1.2.1 Setup Download

Medusa PRO v.1.2.1 is out!

With this Software update we are glad to present new advanced features and support of new devices.
On your numerous requests, we have released feature of repairing devices, which are based on MediaTek CPUs using scatter!
Also added new eMMC functionality - «Boot partition enable» and for Samsung eMMC flash chips - «Remove write protect» and «eMMC geometry edit».
In addition, added support for new Samsung, LG, Lenovo, Alcatel and Oppo devices.

Medusa PRO v.1.2.1 Release Notes:

- Added «Repair devices based on MediaTek CPU's using scatter» feature!
With this feature you can repair different devices via eMMC, which are based on MediaTek CPUs.

To repair such devices, you should perform the next steps:

I. If device eMMC is not damaged
Solder the necessary eMMC wires
Connect the device
Go to «Factory Repair» tab in the Software
Press «Repair devices based on MediaTek CPU's using scatter» button
Select proper scatter and necessary files
Press «Write partitions» button
Device repair is done

II. If device eMMC is damaged

If eMMC chip is damaged, you can replace it to similar Samsung eMMC chip.
You should have CID and know properties (Boot1, Boot2, RPMB partitions’ sizes) of eMMC, which you want to replace.
Connect Samsung eMMC to Box (via soldering eMMC wires or via eMMC adapter)
Press «eMMC geometry edit» button, enter necessary Boot1, Boot2, RPMB partitions’ sizes and set them
Write proper CID of eMMC, which you want to replace
Go to «Factory Repair» tab in the Software
Press «Repair devices based on MediaTek CPU's using scatter» button
Select proper scatter and necessary files
Press «Write partitions» button
After writing will be complete, replace device’s eMMC chip to programmed Samsung eMMC
Assemble the device and power it on. Device repair is done

- Added «Remove write protect» feature for Samsung eMMC flash chips
- Added «eMMC geometry edit» feature for Samsung eMMC. With this option you can set Boot1, Boot2, RPMB partitions’ size for Samsung eMMC
- Added «Boot partition enable» - you can set, whether the device is not boot enabled or select partition, that will be enabled for boot (partition1, partition2 or User area)
- Added support for the following models via eMMC:
Samsung GT-I9060I - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Samsung SM-G531H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
LG F460K, F460L, F460S - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (Thanks to Mr. Hoayeu105 aka AquaSta)
Alcatel One Touch 4030 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
Lenovo P780 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
Lenovo A390 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
Lenovo S820 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
Lenovo A1000F - Read/Write/Erase, Easy Repair, Constructor for Repair Files
Oppo T29 - Read/Write/Erase, Easy Repair, Constructor for Repair Files

- Added support for the following models via USB (note: these devices are already supported via USB in old Medusa Software, they are just revised and added to Medusa Pro Software):
LG D160 - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
LG D280N - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
LG D320N - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
LG D410 - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files

- Improved erase operation (now it is up to 200 times faster)
- Fixed some issues with CID edit
- New features and improvements in "Content Extractor":
added possibility of restoration of deleted data (files, folders)!
To find deleted data, select «Show deleted data» option in «Content Extractor» window and parse (read) data from device or file.
Note: unfortunately, not all deleted data can be undeleted
fixed errors with searching and displaying data
improved cashing process for video-files (in «Search media» window)
added more criteria for inner media-files search
fixed issue with window's hanging after some device been connected
fixed some GUI problems

- Box firmware has been updated! To update firmware, it is necessary to connect the Box and only then run the Software

Please pay attention! As you may have noticed, there is a minor issue with early Medusa PRO boxes firmware update.
Non-updatable boxes are covered with warranty and entitled for replacement by authorized resellers.
It will be not possible to use new eMMC feature («eMMC geometry edit», «Boot partition enable», «Remove write protect») without updating Box firmware!

- All pinouts and repair procedures described in the manual ("Help" button in the software)

Medusa - Ultimate Breakthrough in the Phone Repair!

Download Medusa PRO Software v.1.2.1

Octoplus JTAG PRO v 1.2.1 Setup Download

Octoplus JTAG PRO Software v.1.2.1 is out!

With this Software update we are glad to present new advanced features and support of new devices.
On your numerous requests, we have released feature of repairing devices, which are based on MediaTek CPUs using scatter!
Also added new eMMC functionality - «Boot partition enable» and for Samsung eMMC flash chips - «Remove write protect» and «eMMC geometry edit».
In addition, added support for new Samsung, LG, Lenovo, Alcatel and Oppo devices.

Octoplus Box JTAG PRO Software v.1.2.1 Release Notes:
🐙 Added «Repair devices based on MediaTek CPU's using scatter» feature!
With this feature you can repair different devices via eMMC, which are based on MediaTek CPUs.
Old and new scatter formats are supported.

To repair such devices, you should perform the next steps:

I. If device eMMC is not damaged
Solder the necessary eMMC wires
Connect the device
Go to «Factory Repair» tab in the Software
Press «Repair devices based on MediaTek CPU's using scatter» button
Select proper scatter and necessary files
Press «Write partitions» button
Device repair is done
II. If device eMMC is damaged

If eMMC chip is damaged, you can replace it to similar Samsung eMMC chip.
You should have CID and know properties (Boot1, Boot2, RPMB partitions’ sizes) of eMMC, which you want to replace.

Connect Samsung eMMC to Box (via soldering eMMC wires or via eMMC adapter)
Press «eMMC geometry edit» button, enter necessary Boot1, Boot2, RPMB partitions’ sizes and set them
Write proper CID of eMMC, which you want to replace
Go to «Factory Repair» tab in the Software
Press «Repair devices based on MediaTek CPU's using scatter» button
Select proper scatter and necessary files
Press «Write partitions» button
After writing will be complete, replace device’s eMMC chip to programmed Samsung eMMC
Assemble the device and power it on. Device repair is done
🐙 Added «Remove write protect» feature for Samsung eMMC flash chips
🐙 Added «eMMC geometry edit» feature for Samsung eMMC. With this option you can set Boot1, Boot2, RPMB partitions’ size for Samsung eMMC
🐙 Added «Boot partition enable» - you can set, whether the device is not boot enabled or select partition, that will be enabled for boot (partition1, partition2 or User area)
🐙 Added support for the following models via eMMC:
Samsung GT-I9060I - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Samsung SM-G531H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
LG F460K, F460L, F460S - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (Thanks to Mr. Hoayeu105 aka AquaSta)
Alcatel One Touch 4030 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
Lenovo P780 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
Lenovo A390 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
Lenovo S820 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
Lenovo A1000F - Read/Write/Erase, Easy Repair, Constructor for Repair Files
Oppo T29 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
🐙 Added support for the following models via USB
(note: these devices are already supported via USB in old Medusa Software, they are just revised and added to Medusa Pro Software):
LG D160 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
LG D280N - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
LG D320N - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
LG D410 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
🐙 Improved erase operation (now it is up to 200 times faster)
🐙 Fixed some issues with CID edit
🐙 New features and improvements in "Content Extractor":
added possibility of restoration of deleted data (files, folders)! To find deleted data, select «Show deleted data» option in «Content Extractor» window and parse (read) data from device or file. Note: unfortunately, not all deleted data can be undeleted.
fixed errors with searching and displaying data
improved cashing process for video-files (in «Search media» window)
added more criteria for inner media-files search
fixed issue with window's hanging after some device been connected
fixed some GUI problems
🐙 Box firmware has been updated! To update firmware, it is necessary to connect the Box and only then run the Software
Please pay attention! As you may have noticed, there is a minor issue with early Medusa PRO boxes firmware update.
Non-updatable boxes are covered with warranty and entitled for replacement by authorized resellers.
It will be not possible to use new eMMC feature («eMMC geometry edit», «Boot partition enable», «Remove write protect») without updating Box firmware!
🐙 All pinouts and repair procedures described in the manual ("Help" button in the software)

Download Octoplus JTAG PRO Software v.1.2.1

Octoplus Octopus Suite v 1.4.3 Setup Download

Octoplus/Octopus Suite v.1.4.3 is out!

We have added new Samsung remote services!
Octoplus/Octopus Suite v.1.4.3 Release Notes:


🐙 Factory Unlock for Samsung:
- for users without Octopus box (260 credits)
- for Octopus users without Samsung activation (250 credits)
- for Octopus Samsung owners (220 credits)

🐙 Factory Reset FRP/ Reactivation for Samsung:
- for users without Octopus box (160 credits)
- for Octopus users without Samsung activation (150 credits)
- for Octopus Samsung owners (120 credits)

How to check your balance:
Go to "Support & Options" tab in the Software
Enter your Username (login) and Password
Press "Check balance" button
To perform "Factory Reset FRP" do the next:
Go to "Remote Services" tab in the software
Press "Factory Services (Reset FRP / Unlock)" button
Select USB interface and connect powered on device to directly to PC
Press "Factory Reset FRP/Reactivation" button and follow instructions in the software. If software cannot read necessary data from the phone via UART, please select USB interface, connect the phone via USB cable and repeat "Factory Unlock" operation
To perform "Factory Unlock" do the next:
Go to "Remote Service" tab in the software
Press "Factory Services (Reset FRP / Unlock)" button
Download Octoplus/Octopus Suite v.1.4.3

Octoplus Octopus Box Samsung v 2.3.9 Setup Download

Octoplus / Octopus Box Samsung Software v.2.3.9 is out!

Octoplus/Octopus Box Samsung Software v.2.3.9 is out!
We have added “Factory Unlock” feature and support for Samsung Galaxy C9, Samsung Galaxy On5 2016 Duos TD-LTE, Samsung Galaxy On7 2016 Duos TD-LTE, Samsung Galaxy J3 and other models!

Factory Unlock feature is intended to unlock any phone, with some exceptions, that is not supported by normal means, e.g. QC-based devices with revised security. This will be your emergency button, that you don't really have to touch, like Factory FRP/Reactivation reset. Of course we are focusing on developing new solutions to expand your possibilities in unlocking with no additional charges, but also we hope for this feature to be handy for you one day. Or in two words: it's not obligatory. You don't have to pay for this if you don't really need this

Octoplus/Octopus Box Samsung Software v.2.3.9 Release Notes:
🐙 Added “Factory Unlock” feature!
- This feature costs 220 Octopus credits per phone. Process time: 0-8 hours
- Devices with "Device Unlock App" (T-Mobile and MetroPCS) are not supported and credits will not be refunded!
- Sprint, Verizon devices, which IMEIs starting with 99xx are not supported and credits will not be refunded!
To perform "Factory Unlock" do the next:
Go to "Support & Options" tab in the software
Press "Factory Services (Reset FRP / Unlock)" button
Select UART interface and connect powered on device to Box via UART cable (Samsung C3300k/C3303k micro UART cable with 525-530kOm resistor)
Press "Factory Unlock" button and follow instructions in the software. If software cannot read necessary data from the phone via UART, please select USB interface, connect the phone via USB cable and repeat "Factory Unlock" operation
Factory Unlock process can take 0-8 hours. If the phone will not be unlocked instantly, run the software in a few hours later, press "Status and History" / "Re-fresh" buttons and check unlock status
When status is "Ready", press "Factory Unlock" button again - phone is now unlocked
If device still requests unlock code - enter 00000000 (8 zeroes) code.
🐙 Added support for the following models:
- SM-C9000 - added Read/Write NVM, Write Firmware, Read/Write Security, Read/Write EFS, Read/Write QCN, Enable DIAG, Enable Hidden Languages, Reboot in Download/Recovery mode
- SM-G5700 - added Read/Write NVM, Write Firmware, Read/Write Security, Read/Write EFS, Read/Wrote QCN, Enable DIAG, Enable Hidden Languages, Reboot in Download/Recovery mode
- SM-G6100 - added Read/Write NVM, Write Firmware, Read/Write Security, Read/Write EFS, Read/Wrote QCN, Enable DIAG, Enable Hidden Languages, Reboot in Download/Recovery mode
- SM-J320W8 - added Fast Unlock, Fast Read Codes, Reset FRP (via ADB), Read/Write Security, Read/Write EFS, Enable Hidden Languages, Read PIT, Write Firmware
- SM-J510MN - added Reset FRP, Read/Write/Repair NVM, Write Firmware, Read/Write Security, Read/Write EFS, Read/Wrote QCN, Enable Diag, Enable Hidden Languages, Reboot in Download/Recovery mode
- SM-G389F - Reset FRP (via download mode)
- SM-N930P - added Direct Unlock, Domestic Unlock, Read/Write NVM, Read/Write Security, Read/Write EFS, Read/Write QCN, Enable DIAG, Read PIT, Write Firmware
🐙 Improved "Write Cert" operation for Galaxy S6 and S6 Edge phones: fixed issue, when phone IMEI is 350000000000009 and operation stops after "Exploit has been executed successfully". This issue occurs if phone was processed with other tools.
🐙 All supported operations described in details in the manual ("Cable & Manual" button in the software).

Download Octoplus / Octopus Box Samsung Software v.2.3.9

Monday, October 10, 2016

Xolo Q600 Club Firmware Flash file and flash tool Download

Download official working ROM of Xolo Q600 Club free with all latest version

ALL TOOLS AND ORIGINAL FLASH FILES LINK GIVEN BELOW

Xolo DownloadNow a days everything is on the internet every solution every way anything is on the internet like if my Xolo Q600 Club comes in a problem so firstly i search on the internet for its solution that is why this page is created here below are the some of the software related problems and its solutions Some Major Problem related to Xolo Q600 Club and its free solutions
  1. Xolo Q600 Club Dead - This is the major problem which is faced by many users that their smartphone get dead some users says " my smartphone not going power on " this is why because the phone operating system get corrupted because of unusual applications and virus problem or sometimes roughly used .
  2. My Xolo Q600 Club Restarts automatically sometimes during calling or freeze on welcome logo screen
  3. smartphone Processing gets very slow and sometimes it may be jammed or hang or freeze problem
  4. Some application or new one updates of phone not working and suddenly close after showing error
  5. problem of phone Booting and operating of RAM , windows or operating system not started correctly
  6. some of the functions and apps like Camera , Display , touch , keypad and many more not working
  7. Sometimes Xolo Q600 Club is not accepting any of sim card and showing error like " no sim card found "
  8. Network of my smartphone suddenly get lost for sometime or permanently not solved after searching
How to solve these software related problems in a very simple and best way with 100% assurance If All these problems are coming in your Xolo Q600 Club so it means you have to flash or update your phone with the latest version firmware by using appropriate flash tool and usb drivers and rom file .
Xolo Q600 Club Flash File Here
Firmware
Xolo-Q600-Club-S009 rar

File Password  Is >>    androidflashfile.com

Xolo Q600 Club Flash tool
Xolo Q600 Club usb drivers
How to Flash imei tool
Xolo Q600 Club How to Flash

IP BOX V2 Ver 3.9C Setup Download

IP BOX V2 New update Ver 3.9C come!!!

1:Add Advanced Option for repair Boot,You can press F2 for run it
2:Support Double Boot Auto Distinguish
3:Read SPI Flash auto show you imei
4:WIFI/BT add auto creat。
5:New update Change SN only function ,auto Creat Wifi and BT add,Support all the model
6:if SN has Illegal character, the Tips you for fix it
7:Add new flash support SDMBLBCF4_064G。
8:adjust iPhone5s,now all the 5s change disk,Fingerprint function available

Click Download Last Update Ver 3.9c

computer science course online | computer science degree syllabus | computer science help online | computer science learn online | computer science lectures online | computer science online course | cs final subjects | cs online school | degree computer | degree in programming | free computer classes online | free online computer classes | intro to computer science online | learn computer science online | learn computer science online free | mit computer science online | msc computer science online | online bachelor in computer science | online bachelor of computer science | online bsc computer science | online computer classes | online computer classes free | online computer coding classes | online computer coding courses | online masters cs | online ms in cs | online msc computer science | online projects for computer science students | programming degree | teach computer science online | what is computer science degree

Labels

brand new desktop computers
cheap refurbished laptops
computer desktop packages
computer discount
desktop computer new
desktop computer package deals
desktop computer packages
desktop pc package deals
desktop pc packages
discount computer parts
discount computers
discount desktop computers
discount laptop computers
laptop computer sales
laptop computers for sale
laptop sale
laptops for sale
new computer desktop
new desktop
new desktop computer
new desktop computer with windows 7
new desktop pc
new pc desktop
new windows 7 desktop computers
pc desktop package
refurbished computers
refurbished desktop computers
refurbished laptops
refurbished notebooks
refurbished pc
used laptop for sale