eMMC Pro 1.09 Release Note
Release Notes and Discussion
We are trying to make more powerful eMMC software with every each update
There are alof of optimizations and progress based on customers requests and demands.
# Detection Routines improved .
# Samsung eMMC Firmware Update ( FFU Update )
# Samsung eMMC Firmware Read
# Qualcomm Disk with eMMC Booster interface selected
# Samsung eMMC Boot Resize ( Partition )
# Samsung eMMC RPBM Resize ( Partition )
# eMMC BOOT CFG Setup
# Samsung eMMC CID Writing / Patch
# MTK Preloader.bin CID Parsing for the UI
# UI - Selection of BOOT Size : 1MB to 8MB
# UI - Selection of RPMB Size : 128KB to 1024KB
# UI - Selection BOOT Configuration
# UI - CID Write Module
# UI - CID Load from preloader.bin
# UI - Firmware list with Upgrade and Read options
# New Firmware Released Version = 2017052915210004
When you first run eMMC Pro V1.09 sw will update your firmware .
With the new firmware we have implemented better detection and more features.
and makes it more stable and alot more powerful with more powerful features.
[Samsung eMMC Firmware Update]
Vendor CMDs and sequences implemented in order to update and repair Dead eMMCs
Solution for the known problems :
Brick boot
Boot Loop
SD Mounting Problems
E:failed to mount /data (No such file or directory)
ODIN Flashing failed on PIT known as PIT Failed.
Complete(Write) operation failed.
Firmware List :
Code:
KLM4G1FE3B-B001 KLM8G1WE4A-A001
KLM8G1WEMB-B011 KLM8G1WEMB-B031
KLM8G2FB3B-D001 KLM8G2FB3B-D001
KLM8G2FE3B-B001 KLM8G2YE4C-C001
KLMAG2GE2A-A001 KLMAG2GE4A-A001
KLMAG2GE4A-A002 KLMAG2GEAC-B001
KLMAG2GEAC-B002 KLMAG2WE4A-A002
KLMAG2WEMB-B031 KLMAG4FE4B-B002
KLMAG4FEAB-B002 KLMBG4GE4A-A001
KLMBG4GEAC-B001 KLMCG8GE4A-A001
KMJ5U000WA-B409 KMJ5U000WM-B409
KMJJS000WA-B409 KMJJS000WM-B409
KMK2U000VM-B604 KMK3U000VM-B410
KMK5U000VM-B309 KMK5W000VM-B312
KMK5X000VM-B314 KMK5X000YM-B314
KMK7U000VM-B309 KMK7X000VM-B314
KMK8U000VM-B410 KMKJS000VM-B309
KMKTS000VM-B604 KMKUS000VM-B410
KML5U000HM-B505 KMN5U000ZM-B203
KMN5W000ZM-B207 KMN5X000ZM-B209
KMN9W000RM-B203 KMNJS000ZM-B205
KMS5U000KM-B308 KMS5X000KM-B313
KMSJS000KA-B308 KMSJS000KM-B308
[Samsung eMMC Firmware Read:]
You can read Samsung eMMC Firmware's in case you have New Samsung eMMC in your hand which is not supported !
[Qualcomm Disk with eMMC Booster:]
When there is a Qualcomm disk is connected you can choose eMMC Booster on the interface and write proper dump for it.
eMMC Pro Software handle the procedures directly into Qualcomm Disk !
[Samsung eMMC Boot Resize ( Partition ) :]
Re-Configuring BOOT1 , BOOT2 , RPMB
Configuring Partition Sizes is important if you do not have matching eMMC for another device .
[Solution for :] MTK Devices or any Device for this matter should be able to match the original device (eMMC Configuration ) will let the device work properly .
[eMMC BOOT CFG Setup :]
BOOT Configuration Setup Device (eMMC) to boot in particular Area of the
Device
BOOT1
BOOT2
USER Area
No Boot
[Samsung eMMC CID Writing / Patch :]
Writing any CID into device will help you configure Samsung eMMCs into any eMMC !
For ex : Hynix CID into Samsung eMMC to act as Hynix eMMC
Solution for : Many MTK Mobile phones with unique CID determined !
[MTK Preloader.bin CID Parsing for the UI ]
Parse the preloader.bin and select in order to make it compatible eMMC CID .
[UI Definitions :]
[BOOT Size : ]
You can select the BOOT Size that you want to configure
1MB , 2MB , 4MB , 8MB
[RPMB Size: ]
You can select the RPMB Size that you want to configure
128KB , 256KB , 512KB , 1024KB
[BOOT Configuration : ]
User selects boot data that will be sent to device
Device not boot enabled (default)
Boot partition 1 enabled for boot
Boot partition 2 enabled for boot
User area enabled for boot
[CID Write Module: ]
CID Box acts as Combobox when selected a preloader.bin
Modify and write the require CID into Device .
[CID Load from preloader.bin: ]
Small Button with [+] Loads the preloader.bin and parse into Combobox you to select !
[Upgrade Firmware : ]
It will write selected firmware into eMMC
eMMC ID should match with the Firmware otherwise writing process will fail or will not work .
[ New Firmware : 2017052915210004 ]
Box Firmware with New Functions and CMDs implemented .
Thank you for all eMMC Pro Customers to keep sending us requests and suggestions .
There is a lot more to come
Best Regards
eMMC Pro Team
Advanced eMMC Repair
eMMC PRo - Universal Device Programmer
Add
